Clarke FM40 LX Orbital Floor Machine 56105620 14x20 inch rectangle square dry strip with baseboard cleaner for chemical free floor finish stripping 1.5hp 3540 rpm
Clarke is manufactured by Nilfisk-Advance - the oldest, largest and highest quality maker of floor care equipment in the world, including: Clarke, Viper, Kent, Advance, Euroclean
Clarke FM40 LX Orbital Floor Machine 56105620 14x20 inch rectangle square dry strip for chemical free floor finish stripping 1.5hp 3540 rpm.
The FM40 LX utilizes a dry chemical free process to prepare resilient tile flooring to be re-finished. The Dry Strip Process uses the specially engineered Surface Preparation Pads SPP Maroon 14x20 rectangular pads by 3M or ETC and easily removes surface finish in preparation for recoating. It does not remove the finish below the surface thereby saving the first two coats of recoating finish. Saves time and finish costs.
Floor Pads (CLICK HERE)
Also you can use this machine with chemical stripper in the traditional method with black strip pads for total finish removal when desired.
What's The Secret!
The FM40 LX "vibrates" back and forth about 1/4 inch at a high speed. If this were a round buffer rotating it would have to rotate more than 3,600 rpms - which would throw wet stuff on the wall! Not FM40 LX, the high speed "vibration" removes the finish without splashing! High Speed coupled with the specially engineered Surface Preparation Pads SPP Maroon 14x20 rectangular pads by 3M or ETC, easily removes finish in preparation for recoating!
The FM40 LX has power to spare, it delivers top value, and reliable, long lasting performance for all your hard floor applications like in office buildings, schools and universities, healthcare environments, retail stores, malls, and much more.
The Clarke FM40 LX, using a green process, has the ability to remove several layers of floor finish without water or chemicals. By reducing the amount of water and chemicals used, the process becomes inherently safer for the operator and all personnel. This Green Process reduces the potential for slips and falls.
The FM40 LX's powerful performance and versatile application makes it the must have for any floor maintenance program. Built on the legacy of its predecessor the BOS-18, the Clarke FM40 represents a significant step forward for Clarke orbital scrubbing floor machines. Available in a standard ST version and a feature-rich deluxe LX edition, the FM40 is engineered to deliver the ultimate combination of ease of use and versatility for unmatched performance in both wet and dry applications
Experience a more powerful clean. Don't let the compact size fool you: the FM40 has a full 1.5 horsepower motor, 160 pounds of down pressure and a 3,540 RPM pad driver. That means cleaner floors with fewer passes and less strain on the operator. Accomplish more with less. With a standardized 14 inch x 20 inch pad deck, the versatile FM40 is an ideal replacement for a variety of other equipment, too. In addition to scrubbing small, hard-to-reach areas where using a large autoscrubber doesn't make sense, the FM40 also supplements Clarke BOOST machines to perform chemical-free floor finish removal. When paired with the appropriate pads, the FM40 floor machine can even be used to clean grout in bathrooms, prep gym floors for recoats, bonnet clean carpet, and burnish terrazzo, marble, and concrete.
Now you can clean baseboards without having to purchase a separate machine, or worse, getting down on your hands and knees to scrub. That's because the FM40 LX comes standard with an innovative baseboard cleaner attachment. This simple device easily attaches to the front of the machine to provide a convenient alternative for cleaning baseboards.
- Switchable Modes - Wheels Up or Wheels Down. Easily switch between operating modes with the wheels up or on the floor. When the wheels are up the FM40 LX provides the high fully directional maneuverability of traditional floor machines. When the wheels are down, it delivers high productivity forward and backwards motion like a burnisher with control so balanced that it enables single-handed operation and no fatigue.
Full Modularity for Easy Transport. The FM40 LX easily disassembles without tools to maximize the convenience of transportation. Each of its modular attachment componets is painted bright yellow for easy identification. This allows BSCs and other operators who frequently lift and transport their equipment between job sites to separate it into easily manageable pieces.
The Clarke FM40 LX Has The Following Features
- Built in Baseboard Cleaner
- Adjustable And Detachable Handle
- Wheels Can Be Raised Or Lowered
- 1.5 HP Heavy Duty Motor Driving A 3,540 rpm Orbital Deck
- 14x20 Cleaning Path
- Includes Weight Kit Consisting Of Three 21 lb Weights
- 50 Foot Safety Yellow Power Cord
- Quiet, Low Vibration Design At 68 dBA
The Clarke FM40 LX Has The Following Specifications
- 14x20 Inch Cleaning Pad Size
- 1.5HP Motor
- 12V 60Hz
- 3,540 rpm Orbital Speed
- .25 Inch Orbital Diameter
- 50 Foot 14-3 Safety Yellow Power Cable
- 68dBA Sound Level
- 169 lbs Machine Total Weight
- The Machine Without Weights is 106 lbs
- Removeable Weights are 63 lbs Total
- 20.75x20.5x44.5 Inch Dimensions
- Includes Generous Manufacturer's Warranty (CLICK HERE).
FREE SHIPPING To Continental US Business Address With Dock or Forklift Capable Unloading.
(Note: Additional Delivery Fees Will Apply For Liftgate Requirement, Call Before Delivery Or Residential Address (USPS Designation). Shipping Charges Are To A Continental US Business Address With Dock or Forklift Capable Unloading or Local Freight Terminal.)
Floor Pads (CLICK HERE)
For Product Guide (CLICK HERE).
Operators Manual (CLICK HERE).
Note: All Equipment Sales Are Final And Covered By Manufacturers Warranty.
Cleaning Stuff Service After The Sale (CLICK HERE)
